Fonrich FR-DCMG-MMPS, Руководство пользователя

Страница: 23 / 49

20
Register description
Register description in bit units (function code 02)
Bit address Functional description remark
Hex Decimal
0x0200 512 Bus arc trip state The bus arc is faulted and a trip is performed and this bit is set.
Clear the alarm and set it to 0.
0x0201 513 Channel arc trip state The channel arc is faulted and a trip is performed and this bit is set.
Clear the alarm and set it to 0.
0x0203 515 Bus voltage is too high trip
state The bus voltage is high and an trip is performed and this bit is set.
Clear the alarm and set it to 0.
0x0204 516 Temperature sensor 1 over
temperature and high trip
state The temperature sensor 1 overtemperature alarm and performs a
tripping action, this bit is set to 1. Clear alarm after setting 0.
0x0205 517 Temperature sensor 2 over
temperature and high trip
state The temperature sensor 2 overtemperature alarm and performs a
tripping action, this bit is set to 1. Clear alarm after setting 0.
0x0206 518 Channel reverse current trip
state This bit is set to 1 when the channel current is reversed and the trip
condition is met and a trip is performed. Clear alarm after setting 0.
0x0207 519 Total reverse current trip
state The total reverse current alarm and a trip action is performed and
this bit is set. Clear the alarm and set it to 0.
0x0209 521 Total current is too high trip
state The total current is high and an trip is performed and this bit is set.
Clear the alarm and set it to 0.
0x020A 522 Channel no current trip state This bit is set to 1 when the channel has no current alarm and the
trip condition is met and a trip is performed. Clear alarm after setting
0
0x020B 523 Channel undercurrent trip
state This bit is set to 1 when the channel undercurrent alarm is met and
the trip condition is fulfilled and a trip is performed. Clear alarm after
setting 0
0x020C 524 Channel overcurrent trip
state This bit is set to 1 when the channel is overcurrent and the trip
condition is met and a trip is performed. Clear alarm after setting 0
0x020D 525 Channel current is too low to
trip state This bit is set to 1 when the channel current is low and the trip
condition is met and a trip is performed. Clear alarm after setting 0
0x020E 526 Channel current is too high
to trip state This bit is set to 1 when the channel current is high and the trip
condition is met and a trip is performed. Clear alarm after setting 0
0x0210 528 Switch 1 trip status Switch 1 performs a trip action
0x0211 529 Switch 2 trip status Switch 2 performs a trip action
0x0212 530 Switch 3 trip status Switch 3 performs a trip action
0x0213 531 Switch 4 trip status Switch 4 performs a trip action