FONA CDRelite System User Guide
B1057003 Rev. 3
15
3.6. CDR AutoDetect
The CDR AutoDetect feature instantly recognizes when a different
Schick intraoral USB device used with X-ray image acquisition is
connected — including standard, high-speed (HS), and FONA
CDRelite modules — skipping the step of manually selecting a new
Schick USB device before using it.
CDR AutoDetect will be most useful for offices that employ a mix
of Schick USB modules and Sensors and use them interchangeably
within one or several operatories.
3.6.1. Enabling CDR AutoDetect
CDR AutoDetect is enabled by default. If, however, it has been
disabled and you wish to re-enable it, open the X-ray acquisition
options page (in CDR DICOM, browse to the System menu and
select X-ray Settings). If unchecked, click on the CDR AutoDetect
to mark the checkbox and enable this option. You might also notice
that the Hardware Type drop-down box becomes unavailable, as
detection of Schick USB devices and Sensors will now be
performed automatically.
3.6.2. Disabling CDR AutoDetect
CDR AutoDetect can be disabled at any time by clicking the
checkbox again, which removes the checkmark. By disabling CDR
AutoDetect you will need to return to this property page when
switching different hardware types on the same workstation and
manually select the new device from the drop-down menu.
