Disassembly and replacement instructions
Dispense wheel removal
1. Remove all ice from storage area of
dispenser .
2. Remove center thumbscrew (Fig. 18.1),
locking plate
(Fig. 18.2), two wingnuts (Fig.
18.3) and backing plate (Fig. 18.4) from
front of storage hopper (see drawing at
right) .
3. Remove threaded rod (Fig. 18.5), agitator
(Fig. 18.6), baffle (Fig. 18.7), and wheel
(Fig. 18.8) in this sequence .
Wheelmotor removal
1. Remove dispense wheel .
2. Remove four (4) dispenser motor bracket
mounting screws and washers
(Fig. 19.1) .
3. Remove (4) screws holding motor to
mounting bracket
(Fig. 19.2) .
Fig. 12
7
5
1
6
4
3
2
1
1
8
Fig. 13
1
2
36
E12CI425A 230 V 50 Hz, C12CI425A 220 V 60 Hz
