background image

HCD710A, HMD710A, HCE710A, HME710A 

Horizon Elite™ Ice Machines (Self-contained)

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding 
after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide 
carefully before you begin your installation. 
Should you need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.
Please have your model number, serial number and complete and detailed explanation of the problem when 
contacting Technical Service.

Getting Started

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. All freight 
is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt 
"damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed 
photos of the damage with the original packaging so that we may start the freight claim process.

User Guide

After Serial Number L60417

Please visit 

www.follettice.com/technicaldocuments

  

for the Operation and Service manual for your unit.

Installation and Service Videos:

www.follettice.com/servicevideolibrary

01266543R04

801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com

Содержание Horizon Elite HCD710A

















Отзывы: