background image

2

self-contained 

BIN • RIDE Technology

 

CAUTION!

 

§

This appliance should be connected by a qualified person in accordance with applicable codes.

 

§

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 
qualified persons in order to avoid a hazard.

 

§

Connect to potable water supply only.

 

§

This appliance can be used by children aged 8 years and above and persons with reduced physical, 
sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision 
or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children 
should be supervised to ensure that they do not play with the appliance.

 

§

This appliance is intended to be used for household and similar applications such as staff kitchen areas 
in shops, offices and other working environments; farm houses and by clients in hotels, motels and other 
residential type environments; bed and breakfast type environments; catering and similar non-retail 
applications.

 

§

WARNING! To avoid a hazard due to instability of the appliance, it must be fixed in accordance with the 
instructions.

Configuration

Application

S RIDE™

(RIDE remote

ice delivery
equipment)

T Top-mount 

 425  up to

425 lbs
(193 kg)

 710  up to

675 lbs
(306 kg)

1010  up to

1061 lbs
(482 kg)

1410  up to

1466 lbs
(665 kg)

1810  up to

1790 lbs
(812 kg)

2110  up to

2039 lbs
(925 kg)

V Vision™
H Harmony™
B  Ice storage bin
J Drop-in
M  Ice Manager™ 

diverter valve 
system

P  Cornelius Profile 

PR150

Condenser

Series

Voltage

Icemaker

C 208-230/60/1 (icemaking head)

Self-contained only.

D  115/60/1 (icemaking head)

Self-contained and remote. If remote 
unit, high side is 208-230/60/1.

E 230/50/1 (icemaking head)

Self-contained only.

F  115/60/1 (icemaking head)

Remote only. High side is 
208-230/60/3.

MC Maestro™

Chewblet

®

 

(425 Series)

HC Horizon

Chewblet 
(710, 1010, 1410, 
1810, 2110 
Series)

HM Horizon

Micro Chewblet™

HC

1810

D

S

V

A

A  Air-cooled, self-contained
W  Water-cooled, self-contained
R  Air-cooled, remote condensing unit
N  Air-cooled, no condensing unit for 

connection to parallel rack system

Chewblet

®

 Ice Machine Model Number Configurations

Содержание Horizon Elite Chewblet H C1010ABS Series

















Отзывы: