6
1.1.5 Connections and Cabeling
Please observe the following instructions for wiring your systems:
Make sure that your cables function properly and use only cables with a sufficient cross-
section.
Use only cable and connector materials that meet professional standards.
Use only properly shielded cables and connectors for Audio and data connections.
Only use power cables with intact protective contact connections and ensure that the
device's power plug is accessible at all times so that the device can be quickly disconnected
from the mains in the event of a malfunction.
Lay and fasten the cables in such a way that they are not damaged by tools or pinched by
the device or a wall bracket and thus damaged.
Secure all laid cables against mechanical damage or tensile forces that occur.
Avoid too high tightening torques for the screws of the connection terminals!
The wiring of loudspeakers should only be carried out by qualified personnel!
1.2 Operating conditions
Please observe the following notes when operating your system:
The permissible ambient temperature of the device during operation ranges from 0 °C to
+40 °C.
The device is intended for operation in a dry environment with normal dust and moisture
content of the air.
If dew has formed on the device or its rear panel during transport or storage, allow the
device to acclimatize for approx. 2 hours before operating it.
Never expose the device to aggressive chemical liquids or vapors.
Always ensure that heat is dissipated via the outer surface of the housing.
Always ensure that the device is well ventilated. To ensure sufficient cooling, do not cover
the device with cloths. Heating of the housing by sunlight or strong spotlights should be
avoided.
Never expose the units to major vibrations.
