4
1.1.2 General Safety Instructions
Danger
:
To avoid danger to life and limb, ensure that all persons involved in the installation, operation or
dismantling of such a system have read and understood these operating instructions.
Nevertheless, the information presented here is intended as accompanying advice and does not
affect the user's responsibility for the safe operation of a
Fohhn
system on site.
Warning
:
To avoid injury
this equipment must be stored, installed and operated out of the reach of children.
To prevent injury, this equipment must be taken out of service, tagged, and secured against
accidental operation if it
shows visible signs of damage,
is suspected of containing loose parts,
no longer operates correctly,
has been exposed to unfavorable conditions for a long time (e.g. wetness)
has been exposed to bad transport conditions (e.g. unsuitable packaging or humidity).
If necessary, please contact your Fohhn dealer and the transport company immediately. You will
find the contact details in the appendix to these operating instructions
1.1.3 Electrical Safety Instructions
Devices with integrated Fohhn power amplifiers are devices of protection class 1. They are built and
tested in accordance with the VDE protective measures for electronic devices and leave our factory
in perfect condition with regard to safety. The devices comply with all currently valid standards of the
EMVG law: The CE mark affixed to the device confirms this.
The relevant standards can be found in the appendix to these operating instructions!
Warning:
To minimize the risk of electric shock,
The protective contact connection of the mains plug must never be disconnected and the
plug must never be taped off.
The device may only be connected to protective contact sockets that have been checked by
a specialist.
The device housing must never be opened. The device does not contain any components
that can be repaired by the user. In the unlikely event of a defect, please contact qualified
service personnel and/or the dealer from whom you purchased your system!
Also make sure that the local mains voltage matches the supply voltage indicated on the device.
