IMPORTANT SAFEGUARDS
When using the meat grinder, basic safety precautions should always
be followed to avoid the risk of fire, electric shock, or injury to persons,
including the following:
•
Please read all instructions prior to operating this appliance.
•
NOTE:
Check if the voltage indicated on the appliance corresponds
to the local mains voltage before you connect the appliance.
•
WARNING:
This appliance should not be used by or near children.
Please keep out of the reach of children.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
•
Do not
operate this unit near an open flame or any hot surface.
• To avoid the risk of electrical shock,
Do not
put the appliance in
water or other liquids.
•
Do not
let the cord hang over the edge of the table or counter,
come into contact with sharp edges, or touch hot surfaces.
•
Do not
unplug the unit by pulling on the electrical cord itself. Never
unplug the unit with wet hands.
•
WARNING:
Check whether all parts are damaged before use. If the
component is found to be damaged, please stop using this product
and contact our company's customer service. Please do not detach
and repair the damaged component by yourself because it may be
dangerous.
•
WARNING:
If this product needs maintenance during the process of
use, please contact customer service. Please do not detach this
product by yourself because it may be dangerous.
•
WARNING:
Wash all components before using. Do not immerse the
Motor housing in water.
DO NOT WASH ANY PARTS OF THIS
GRINDER IN A DISHWASHER.
(Refer to Washing Instructions
section on page 14.)
•
WARNING: THE CUTTING BLADE IS SHARP, HANDLE WITH
CARE BOTH USING AND CLEANING.
•
WARNING:
Always monitor the grinder during use.
Do not
leave
unattended. It is recommended that after 5 minutes of continual use,
the unit should be allowed to cool for a few minutes to prevent
overheating.
• This grinder is
NOT
intended for grinding
ANY
bones, sinew, and
fat beef.
Grinding bones with this grinder will damage the unit and
render it useless.
• Never add meat products by hand.
ALWAYS
use the food pusher
provided.
Do not
use knives, forks, spoons, etc. to push meat down
the grinding head chute.
• Never carry the unit by the grinding head or hopper plate. Please lift
the entire appliance when moving.
•
WARNING:
Switch the appliance off before detaching and install
any accessory.
• Tun off the machine and allow the auger to completely stop before
changing the grinder settings from
SLOW
to
REV.
(and vice versa)
Rapid changes in auger direction could damage the motor.
•
NOTE:
Meat preparation and temperature are very important for
optimal performance and results. (Read the Pre-Grinding Meat
Preparation section before using it on page 6.)
•
NOTE:
Check that the grinding cutting blade is inserted correctly
prior to use. (Cutting Blade Assembly photos on page 6.)
01
02
