3. When the " " and " "lights is on, press the" " button and the coffee starts to flow
out 1 cup of coffee. (or press the " " button to release 2 cups of coffee)
4. At the same time, adjust the position of the coffee cup to let the coffee flows into the cup
along the cup wall.
5. The appliance will automatically stop flow after dispensing the right amount of espresso.
The espresso is ready to serve.
6. After making the espresso, remove the portafilter and pour out the used coffee ground.
Memory Function -- Set the Amount of Output
1. After preheating is complete, (when the " " and " " lights are on), press and hold
the " " button , and the portafilter starts to dispense coffee. When the desired amount
is reached, release the " " button, you will listen a beep from the machine. At that time,
the setting amount of single-cup is finished and it will be saved for the next operation.
Note:
1) The longest time is 60 seconds, if the setting is invalid for more than 60 seconds,
remaining at the default time.
2) If the set time is too short, the memory time will not be saved, the output volume should
be more than 15ml.
3) The dispensing amount ranges from 15ml to 200ml.
2. " "button memory function setting is the same as above.
3. Restore Default Setting: press and hold " " +" "buttons for 3 seconds
simultaneously. When buttons are on and rings 3 times, reflecting default setting has been
restored.
Cooling Function
1. When you want to make coffee after steaming, turn off the " " button, the " " and
" " lights will flash simultaneously, this is because the temperature is too high, the
machine needs to be cooled.
2. At this time, turn the "steam knob" to" ", the machine starts to pump water, and the
steam wand starts to discharge water continuously and cool down.
3. When the " " and " " lights stop, turn the "steam knob" to " " and stop
cooling down. The machine can be used normally.
Cleaning and Maintenance
1. Unplug the power and let the coffee machine cool down completely.
2. Wipe the outside and parts of the coffee maker with a damp cloth or a clean sponge, then
dry them.
Note:
Do not use alcohol or solvent cleaner, do not immerse the machine into water for
cleaning.
3. Unscrew the portafilter and pour out the used coffee ground, then clean the portafilter with
cleanser and rinse it with water.
Note:
The portafilter is not dishwasher safe, do not clean it in the dishwasher.
Frothing Milk
1. Press " " and then press" ". At this time, the " " indicator starts to flash until the
indicator is on and the preheating is completed.
2. Pour iced whole milk into 1/3 of the milk frothing pitcher, insert the steam wand 1CM into
the milk, then slowly unscrew the "steam knob" until the steam starts to come out.
(
Note:
Steam can be adjusted according to personal proficiency. Please release a little
water in the steam wand before foaming)
3. When the temperature of milk reaches about 75 degrees and the milk foam begins to
inflate, you can turn the "steam knob" to " " and press " "to close the steam.
Hot Water Function
Press the " " button, turn the "steam knob" to" ", and the steam wand starts to
discharge hot water continuously. Turn the "steam knob " to" " if you want to stop the
hot water.
01
02
03
04
05
06
07
Содержание CM6851
Страница 6: ......
