Foerster TAK5-CH1-25, Инструкция по эксплуатации

Страница: 61 / 226

Setup 61
MilkMaker
If the automatic feeder is equipped with an optional MilkMaker-
dosing unit, larger milk quantities can be prepared and pumped
into a container or a transport unit (e.g. a MilchMobil).
4.6 Identification
Type
Here you can enter the identification system in accordance with
the identification system of the sales partner.
Squelch
Via the Squelch value you can adjust the input and reading sen-
sitivity of the identification. The higher the entered value, the
smaller the identification range.
4.7 ID-chip
Before the automatic feeder Vario is delivered, all Setup settings
are unchangeably stored on the ID-chip. Therefore, the primitive
state of the setup can be restored at any time, e.g. if you acci-
dentally changed a setting or had to replace the CPU board.
In the line activated you must select yes .
The automatic feeder Compact is not equipped with an ID-
chip. Therefore, in the line activted no must be selected.
To transfer the data from the ID-chip to the CPU board , in read
in? press .
4.8 Stations
In the menu stations you can activate additional feeding or con-
centrate stations and determine the accessories which may be
available for them. The Compact and Vario feeders are equipped
as standard with one box valve for one feeding station.
identification
type: [Nedap]
Squelch: 180
ID-chip
activated: [ yes]
read in?
stations
feed
concentrate
animal scales