Foerster TAK5-CH1-25 Скачать руководство пользователя страница 44

Страница: 44 / 226

Start-up

> For hygienic reasons, avoid too large differences in cross sec-

tions.

> Solely use connection pieces which are easy to clean.

> Close the milk supply on the automatic feeder by means of

the blind plug, if the automatic feeder solely operates in the

water mode.

3.5

Mounting the feeding station

> Install an appropriate race-way in front of the feeding station.

This prevents the animals from being pushed aside by other

animals.

> Mount the feeding station according to the enclosed manufac-

turers' instructions.

3.6

Connecting the antennas

3.6.1

Notes on how to mount the antennas

> Mount the antennas according to the mounting instructions.

> Keep the distance between the antenna and the transmitter

as short as possible.

> Check the identification range of the antennas by means of

the antenna test.

> If an entitled animal is staying outside the feeding station but

within the identification range of the antenna, it may happen

that a feed portion is prepared which is not consumed by the

Note:

Air-containing pipes, very long and thin, as well as

thin-walled pipes prone to contract, may break-off the feed-

ing mode or lead to unintentional change-over to the MP-

mode.

Содержание TAK5-CH1-25



































































































































































































































Результаты поиска

Содержание TAK5-CH1-25

Отзывы:

Бренды по названию

Популярные бренды

Foerster TAK5-CH1-25, Инструкция по эксплуатации

Результаты поиска

Содержание TAK5-CH1-25

Отзывы:

Бренды по названию

Популярные бренды