Foerster TAK5-CH1-25, Инструкция по эксплуатации

Страница: 100 / 226

100 Transmitter and animal management
7.2.2.1 Deactivating the automatic registration
The automatic registration is deactivated as a standard. You can
restore this state at any time:
1. > animal management > register > automatic
2. In mode select no and confirm with . The automatic reg-
istration is now deactivated.
7.2.2.2 Registering only available transmitters automatically
The automatic registration shortens the registration process of
the animals. You can determine that only those animals whose
animal numbers (more precisely: the allocated transmitter num-
bers) are already known by the system, are registered. If such an
available transmitter number is detected by the identification, the
corresponding animal will be automatically registered. The ani-
mals resp. transmitter numbers which haven’t been entered into
the system yet are still the cause for the warning unknown
transmitter .
1. > animal management > register > automatic
2. In mode select available.
3. Select the group into which you would like to register the ani-
mals automatically (here exemplified by group A).
4. Select one or more additive prescriptions.
automatic
mode: [no]
Note: If the registration function is deactived, the warn-
ing unknown transmitter (see 12.2.13 Unknown trans-
mitters, page 186 ) will be given in case a non-registered
animal enters the station.
automatic
mode: [available]
group: A
additive 1: P1
additive 2: no
weight: 51 kg
w. gain: 510 g
no prescription
available
Note: Before additive dispense can be started, the pre-
scriptions for additive 1 or/and additive 2 must have
been created (see 8.5.1 Creating a medicine prescrip-
tion plan, page 126 ), otherwise the message on the right
will be displayed.