Focustronic Mastertonic, Руководство пользователя

Страница: 27 / 33

27
Appendix
OLI
OLI is our own parameter designed by Focustronic, and has a
range between 0-200 Units. It measures the yellow
discolouration of water, but also other colours as a sign of
organic waste substances in the water. Until now it has been a
total guessing game when the time to change the activated
carbon, or increase/decrease the ozone to get rid of the waste
substances from the organic load. 0-value means a water with
no signs of colour at all. Its not possible to say what sort of
value is optimal, so see this function as more like a barometer
that tells you when something has changed, and its time to take
some action (like change the activated carbon etc). You
calibrate the OLI against some RO/Distilled water (see calibrate section)
We
recommend to recalibrate OLI every 4 weeks .
Summary of settings in assigned DT/ST/PT
Update Dosetronic to make it communicate with
Mastertronic
To get the regulatory functions between Mastertronic and Dosetronic , you have to
run a Dosetronic unit with software version V02.05.07 or later. ALL DT-units are easy
Dosetronic Powertronic Solartronic
+ Direction Mode High value=Increase
dose
Low value=decrease
dose
High value=open
socket
Low value/normal
value=close socket
High value=Increase
light intensity
Low value=decrease
light intensity
- Direction Mode High value=Decrease
dose
Low value=Increase
dose
High value=Close
socket
Low value/normal
value=Open socket
High value=decrease
light intensity
Low value=increase
light intensity
Default