Focusrite Scarlett Solo, Руководство пользователя

Страница: 10 / 20

10
Audio Setup in your DAW
The Scarlett Solo is compatible with any Windows-based DAW that supports ASIO or WDM or
any Mac-based DAW that uses Core Audio. After following the Getting Started procedure
described above, you can start using your Scarlett Solo with the DAW of your choice. To allow you
to get started if you do not already have a DAW application installed on your computer, both
ProTools | First and Ableton Live Lite are included; these will be available to you once you’ve registered
your Scarlett Solo. If you need help installing either DAW, please visit our Getting Started pages at
https://focusrite.com/get-started , where Getting Started videos are available.
Operating instructions for ProTools | First and Ableton Live Lite are beyond the scope of this
User Guide, but both applications include a full set of Help fi les. Instructions are also available at
www.avid.com and www.ableton.com respectively.
Please note - your DAW may not automatically select the Scarlett Solo as its default I/O device. In this
case, you must manually select
Focusrite USB ASIO
as the driver on your DAW’s Audio Setup*
page. Please refer to your DAW’s documentation (or Help fi les) if you are unsure where to select the
ASIO or Core Audio driver. The example below shows the correct confi guration in the Ableton Live
Lite Preferences panel (Windows version shown).
*Typical name. Terminology may differ slightly between DAWs.