Focusrite RedNet Скачать руководство пользователя страница 22

Страница: 22 / 28

USING DANTE VIRTUAL SOUNDCARD

If your RedNet system is to be based on Dante Virtual Soundcard instead of a RedNet PCIe card, you

will need to download the application from the Audinate website, www.audinate.com, and install

it. Each RedNet I/O interface is supplied with Dante Virtual Soundcard download instructions and

a software license. Having registered your purchase with Focusrite, you will be able to access the

activation code for Dante Virtual Soundcard in the “My Products” area of the Focusrite website.

A comprehensive User Guide for Dante Virtual Soundcard is also available from the Audinate website.

Dante Virtual Soundcard users are recommended to download this document as well and read it

thoroughly.

Once Dante Virtual Soundcard is installed, your RedNet system will operate in a very similar manner

to that already described for systems using the RedNet PCIe card. Note that RedNet Control will

still need to be installed for a Dante Virtual Soundcard-based system. There will be no differences

in RedNet Control’s operation.

The fundamental difference between a Dante Virtual Soundcard-based system and a RedNet PCIe

card-based system is that Dante Virtual Soundcard imposes certain restrictions on the system’s

maximum capabilities. The most important of these are:

•

Dante Virtual Soundcard only supports sample rates of 48 kHz and 96 kHz

•

Dante Virtual Soundcard only supports up to 64 bidirectional audio channels

•

Dante Virtual Soundcard will impose higher latency on system operation, but is a good

alternative for mobile recording

IMPORTANT NOTE: Dante Virtual Soundcard is a product of Audinate Pty Ltd., and

is NOT a Focusrite product. As such, variation to the specification and development

of the product is subject to change which is out of the control of Focusrite.

Intending Dante Virtual Soundcard users are recommended to obtain any additional information

required from www.audinate.com.

USING DANTE CONTROLLER

Audinate Dante Controller is installed on your computer as part of the RedNet Control installation.

You can launch Dante Controller either by navigating to its shortcut (in

Finder > Applications

on Macs or in

All Programs

in Windows), or by selecting

Edit Routing

from the right-click Utility

menu in RedNet Control.

Содержание RedNet





























Результаты поиска

Содержание RedNet

Отзывы:

Похожие инструкции для RedNet

Бренды по названию

Популярные бренды

Focusrite RedNet, Руководство пользователя

Результаты поиска

Содержание RedNet

Отзывы:

Похожие инструкции для RedNet

Бренды по названию

Популярные бренды