Focusrite Logic Pro Скачать руководство пользователя страница 27

Страница: 27 / 29

Automation - Tips and Suggestions

Control 2802 Logic Pro Automation & Control Surface Manual

Automation - Tips and Suggestions

Whether you are writing automation on your DAW or analogue layer, the following tips and suggestions apply.

Automation Modes in Logic

We recommend the use of Touch, Latch and Read mode for

the majority of your work.
Touch mode provides the most essential workflow, writing

automation data when a fader is touched or moved, and

returning to previously recorded automation data when a fader

is released.
Note that the Control 2802 faders are motorised and touch

sensitive.
Latch mode is useful, but will write up to the last touched

fader position unless playback is stopped. Therefore, you may

overwrite important rides. If so, use the stages of undo in your

DAW.
Read mode is used to play back automation data.
Be very careful if using Write mode, as Logic may automate

any paramater touched - plug-ins, EQ bands, everything if

you’re not careful!

Writing and Viewing Automation in Logic

Fader rides and mutes can be recorded into Logic and

viewed, edited or manually drawn, as in any other DAW-based

automation system.
To view your recorded automation press ‘A’ on your computer

keyboard (this is a standard Logic keyboard shortcut). Or click

on the automation icon at the top of the screen.

Hiding Tracks in Logic

When running automation on both DAW and analogue fader

layers, you may find it useful to hide the analogue automation

tracks (1-8). Hiding the tracks still allows the automation data to

function but keeps your session tidy.
Note that you can only access this option if you set Channel

Strip View to Tracks Only during step 2 of the HUI

controller

configuration, see page

Select the tracks you wish to hide by clicking on the small ‘H’

beside each channel. Then, to hide (or show) the tracks, press

‘H’ on your computer keyboard. Or click on the small ‘H’ hide

icon at the top of the ‘Arrange’ window.

Содержание Logic Pro






























Результаты поиска

Содержание Logic Pro

Отзывы:

Похожие инструкции для Logic Pro

Бренды по названию

Популярные бренды

Focusrite Logic Pro, Руководство по управляющим поверхностям

Результаты поиска

Содержание Logic Pro

Отзывы:

Похожие инструкции для Logic Pro

Бренды по названию

Популярные бренды