background image

3

OVERVIEW

WARNING: Excessive sound pressure levels from earphones and headphones can cause  
hearing loss.

WARNING: This equipment must only be connected to USB Type 2.0+ or Thunderbolt 3.0+ ports.

Introduction

Thank you for purchasing this 8Pre, a high-performance and immensely capable studio 

centrepiece for PC or Mac. Eight next-generation, high-headroom, low-noise, low-distortion  

mic preamps - featuring the unique All-analogue Air function - help you capture superbly clear 

recordings, and independent A-D and D-A converters with improved dynamic range bring you closer 

than ever to your music.

This User Guide provides a detailed explanation of the hardware to help you achieve a thorough 

understanding of the product’s operational features. We recommend you take the time to read the 

Guide, so you are fully aware of all the features the 8Pre has to offer.

IMPORTANT: As well as this User Guide, you will need the 

Focusrite Control

 Software 

Guide which can be downloaded from 

focusrite.com/downloads

This contains full details of 

Focusrite Control

, the software application designed 

specifically for use with the Focusrite  range of interfaces.

If either User Guide does not have the information you need, please go to  

support.focusrite.com

, where you can find articles and tutorials beyond the scope of this 

user guide. A Getting Started video tutorial is also available, at  

focusrite.com/get-started/ClarettPlus-8Pre

.

Содержание Clarett 8 Pre


























Отзывы: