Quickstart Guide
Solarix 60
1.
Unfold the solar panel completely and make sure that all the cells are facing directly to the sun.
2.
Using the included DC cable connector, plug one end to the DC socket on the solar panel control box shown
below.
3.
Plug the other end to the power input socket of the power station. Below shows the FLEX-GEN 200 unit for
reference purposes.
4.
With enough sunlight, the power station will indicate charging by blinking the charge percentage value on the
display.
5.
The charging is finished once the display indicates 100%. Unplug the solar panel from the unit. Fold the solar
panel for storage.