Fnirsi FNC88, Руководство пользователя

Страница: 16 / 17

15
七、Supplementary note
1
、
About Type-C
The common TYPE-C lines only have single-sided CC. If the connected device is not bright,
please flip the interface.
2
、
About Huawei SCP
Huawei SCP protocol is invalid after exiting the interface.
3
、
About PD protocol trigger
When the PD protocol triggers to a fixed voltage power supply, the PD protocol is still valid
when exiting the PD interface; if PPS power is selected, the interface is invalid.
4
、
About hardware PD switches
(1) Some chargers need to turn on the PD switch to supply power
；
(2) When using the auto-detect fast charge protocol function, be sure to turn on the PD switch
and then connect the tester
；
(3) If other protocols (such as QC2.0, etc.) are triggered after the PD protocol is triggered, the
trigger is invalid (the PD has a higher priority), and the PD switch can be turned off at this
time to trigger other fast charging protocols normally.
5
、
About HID-USB interface
(1) Data transmission with host computer
；
(2) Provide an independent power supply. Use of an independent power supply for high
voltage and high power measurement can reduce the tester's heat and make the
measurement more accurate.
6
、
6.About reverse current measurement