THERMOSTATS
User Manual
WARNING
−
Read instructions before installing or operating
this device. Keep for future reference.
−
Installation should be done by qualified personnel
following all National, State, & Local Codes
−
Be sure to remove all power supplying this
equipment before connecting or disconnecting
wiring.
−
Only install the thermostat inside an electrical
enclosure.
−
A disconnection system must be installed upstream
of the thermostat.
−
Protection against access to live parts must be
covered by the installer.
−
Don’t install in ambient conditions with excessive
moisture and dirt.
−
Thermostat must be installed in a position that will
allow for adequate ventilation.
−
Do not mount near easily flammable materials.
−
Follow all technical data shown in this manual.
Customer is solely responsible for validating application, operation,
maintenance, and code compliance and other information and data
relating to the installation, operation, safety, and maintenance of all
components. There is no guarantee that this information is suitable for
your application, nor is there any manufacturer/supplier assumption of
responsibility for your product design, installation, testing, or operation.
Information herein is provided “as is” with no guarantee of any kind.
Every attempt has been made to ensure the accuracy and reliability of
the information provided in this document.
1 - DESCRIPTION
GENERAL DESCRIPTION
Thermostats utilize bimetallic junctions and are
available in single and double models. Mountable to
35mm DIN rails. NO or NC contacts.
Part Number
Contact
Style
Function Dial
Color
FTM-TSTAT1-140
1NO
Cooling
Blue
FTM-TSTAT2-140
1NC
Heating
Red
FTM-TSTAT12-140 1NO+1NC C
Heating
Blue
+
Red
FTM-TSTAT-3-140
Change
Over
Cooling or
Heating
Blue
2 - DIN RAIL INSTALLATION
WARNING
−
Before installation, switch off the power
supply.
−
Do not mount thermostat near heat
sources to prevent improper temperature
sensor.
−
Do not install in a corrosive atmosphere.
−
Thermostats are only to be installed
inside an electrical enclosure.
3 - DIN RAIL REMOVAL
WARNING
−
Before removal, switch off the power
supply.
E348803
