background image

flyzoneplanes.com

© 2015 

Flyzone, a Hobbico company.

Wingspan: 

25 in [635mm]

Wing Area: 

141 sq in [9.1 dm

2

]

Weight: 

24–25 oz [680–710g]

Wing Loading: 

24.5–25.5 oz/sq ft [75–78 g/dm

2

]

Length: 

31 in [785mm]

Radio: 

3-Channel Minimum

WARRANTY
Flyzone

®

 

guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover 

any component parts damaged by use or modification. 

In no case shall Flyzone’s liability exceed the original cost of the purchased kit.

 

Further, Flyzone reserves the right to change or modify this warranty without notice.

In that Flyzone has no control over the final assembly or material used for final assembly, no liability shall be assumed nor accepted for any 
damage resulting from the use by the user of the final user-assembled product. By the act of using the user-assembled product, the user 
accepts all resulting liability.

If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this kit immediately 
in new and unused condition to the place of purchase.

Thank you for purchasing the latest version of the Flyzone L-39. A more powerful motor is now included which will enable speeds 
approaching 100mph! The L-39 flies like it’s on rails and the vibrant color scheme looks great as it cuts across a blue horizon. Durable EPO 
foam construction resists damage from bumpy landings and repairs easily with regular CA glue. A display stand is included to show off your 
model on your trophy shelf when it’s not busy carving up the skies above your flying field!

For the latest technical updates or manual corrections to the L-39 visit the Flyzone web site at www.flyzoneplanes.com. Open the “Airplanes” 
link, then select the L-39. If there is new technical information or changes to this model a “tech notice” box will appear in the upper left 
corner of the page.

For warranty claims contact Flyzone Product Support:

Flyzone Product Support:
3002 N Apollo Drive Suite 1
Champaign, IL 61822 USA

Telephone: (217) 398-8970 ext. 6
Fax: (217) 398-7721
E-mail: [email protected]

READ THROUGH THIS MANUAL BEFORE STARTING ASSEMBLY. 
IT CONTAINS IMPORTANT INSTRUCTIONS AND WARNINGS 
CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.

FLZA3634Mnl

Содержание Rx-R L-39













Отзывы: