Quick start guide SensBox
4
3.
General information
The
SensBox
is a universally usable
Sensor platform
for leisure activities in a wide
and varied range. The measurements provided by this device serve as information
for the user and are intended to support him in his activity. The instrument
records his movements in 3D on a SD-card in the internationally common *.igc
format. The *.igc file is provided with a digital signature which will make visible
possible manipulations of the file.
The execution of all activities is however always carried out in one's own
responsibility. Bräuniger GmbH may never be held responsible for a possible
malfunction of the
SensBox
in no application whatsoever. The casing is
waterproof. Therefore the
SensBox
can be used for all outdoor activities.
4.
Startup
The
SensBox
is supplied with the following components:
a.
USB cable
b.
USB plug-in power supply for 100 … 240 V~
c.
4 GB SD smart card ( inserted into the device )
d.
carrying pouch
Before the first switch-on of the
SensBox
please check if all parts are present.
As the next step the built-in
Lithium-accumulator
should be charged once.
For this purpose please connect the USB cable with the
SensBox
and the plug-in
power supply. The charging process will be automatically stopped upon fully
charged battery and will last several hours according to battery status. Due to the
fact that it is a standardized USB interface, the
SensBox
can also be charged at
other USB charge ports.
