Website
43
7.5 Screen Settings
With this function, you can select the display and
layout parameters of the "Top bar" widget and "Main
view" widget in the main interface.
In the Main View menu, click the layout box to select
different layouts, such as "1+2", "1+3", "2+2", "2x2",
etc. Users can choose different layouts according to
their needs.
In the Main View of EdgeTX, you can set multiple
interfaces as required by clicking "+" in the top box.
After the setting is completed, you can switch to other
interfaces by sliding the screen in the main interface.
You can set up to three sub-interfaces.
Click the "Set" widget to enter the setup interface.
Click on a layout box. A pop-up window is displayed,
indicating to select a widget. That is, you can select
different widgets, such as "Models current model",
"Outputs current output of each channel", "Timer", etc.
Top Bar
Select whether to enable the top bar display in the
main interface.
Flight Mode
Select whether the flight mode can be displayed.
Slider
Select whether the main interface displays the position
of the slider VRA/VRB.
Trim
Select whether the main interface displays the trim
position.
Mirroring
(To be updated...)
7.6 Reset
You can reset the flight record, timer and transfer-back
parameters. For the reset function, you can assign a
switch as a reset switch by choosing "Model Settings"--
"Special Function" or "Global Function".
