Flymo Turbo Lite Скачать руководство пользователя страница 9

5055314-03

Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);

Category............................Electric Rotary Lawnmower
Type(s) ............................TL330, TL350, TL400
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label

Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC (until 28.12.09),  2006/42/EC (from 29.12.09),  2004/108/EC,  2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3

The maximum A weighted sound pressure level L

pA

at the operator’s position, recorded on a

sample of the above product(s) corresponds to the Level given in the table.

The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on
a sample of the above product(s) corresponds to the Value ah given in the table.
2000/14/EC: The Measured Sound Power L

WA

& Guaranteed Sound Power L

WA

values are

according to the tabulated figures.
Conformity Assessment Procedure............... Annex VI
Notified Body................................................. Intertek, Cleeve Road

Leatherhead, Surrey
KT22 7SB, England

Newton Aycliffe  19/11/2009
M.Bowden
Research & Development Director
Husqvarna UK Ltd.
Keeper of technical documentation

Type

Width of Cut (cm)

Speed of Rotation of Cutting Device (rpm)

Power (kW)

Measured Sound Power L

WA

(dB(A))

Guaranteed Sound Power L

WA

(dB(A))

Level (dB(A))

Value ah (m/s

2

)

Uncertainty K of ah (m/s

2

)

Weight (Kg)

TL330

33

6,300

1.15

95

96

82.4

0.801

1.5

6.5

TL350

35

4,100

1.4

95

96

85.7
5.44

1.5

7.5

TL400

40

4,100

1.5

95

95

82.7
1,22

1.5

7.5

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

Copyright © 2008 Flymo S.A. All rights reserved.  Flymo® and other product and feature names are registered or unregistered trademarks

of Flymo S.A.

Husqvarna AB,

561 82 Huskvarna,

Sweden

EC Declaration of Conformity

Содержание Turbo Lite










Отзывы: