Flymo Turbo Lite Скачать руководство пользователя страница 2

electric cable
with moulded

on plug

plastic handle

knob x 2

cable clip x 2

bolt x 2

instruction

manual

lower handle 

washer x 2

fixing pin x 2

spanner/scraper tool

cutting height spacers 

(Turbo Lite 330 - 1 fitted to lawn-

mower & 2 in loose parts pack)

(Turbo Lite 350/400 - 1 fitted to lawn-

mower & 3 in loose parts pack)

Carton Contents

IMPORTANT ! Please check the
contents of the carton are correct
BEFORE assembling your new
Flymo product.
IF ANY PARTS ARE MISSING
CONTACT:-
Husqvarma UK Ltd. Customer Serv-
ice Department direct
Telephone : 0844 844 4558  UK
1800 882 350  ROI
Fax :

01325 302530

Safety

If not used properly this product can be dangerous!  This product can cause serious injury to the opera-
tor and others, the warnings and safety instructions must be followed to ensure reasonable safety and
efficiency in using this product.  The operator is responsible for following the warning and safety instruc-
tions in this manual and on the product.

Explanation of Symbols on your product

Warning

Read the user instructions carefully to make
sure you understand all the controls and what
they do.

Always keep the product on the ground when
mowing. Tilting or lifting the lawnmower may
cause stones to be thrown out.

Keep bystanders away.  Do not operate whilst
people especially children or pets are in the
mowing area.

Switch off! Remove plug from mains before
adjusting, cleaning or if cable is entangled or
damaged. Keep the cable away from the
blade.

Beware of severing toes or hands.
Do not put hands or feet near a rotating blade.

Keep the cable supply away from the
blade.

General
1. This product is not intended for use by persons (including

children) with reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning the
use of the product by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the product.  Local regulations may restrict the
age of the operator.

2. Never allow children or people unfamiliar with these

instructions to use the product.

3. Stop using the machine while people, especially chil-

dren, or pets are nearby.

3. Only use the product in the manner and for the func-

tions described in these instructions.

4. Never operate the product when you are tired, ill or

under the influence of alcohol, drugs or medicine.

5. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical
1. The British Standards Institute recommend the use of a

Residual Current Device (R.C.D.) with a tripping current
of not more than 30mA.  Even with a R.C.D. installed
100% safety cannot be guaranteed and safe working
practice must be followed at all times.  Check your
R.C.D. every time you use it.

2. Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

3. Do not use the product if the electric cables are dam-

aged or worn 

4. Immediately disconnect from the mains electricity supply

if the cable is cut, or the insulation is damaged.  Do not
touch the electric cable until the electrical supply has
been disconnected.  Do not repair a cut or damaged
cable.  Replace it with a new one.

5. Your extension cable must be uncoiled, coiled cables

can overheat and reduce the efficiency of your product.

6. Keep cables away from the blade.  The blade can

cause damage to cables and lead to contact with live
parts.  Always work away from the power point mow-
ing up and down, never in circles.

7. Always switch off at the mains before disconnecting

upper handle

nut x 2

Содержание Turbo Lite










Отзывы: