Flymo EasiLife Скачать руководство пользователя страница 29

Страница: 29 / 52

4.3.2 Secondary area

To cut secondary areas the operating mode

Secondary

area

must be selected. In this mode, you must move

the product manually between the main area and the

secondary area. The product cuts for a selected period

of time or until the battery is empty. When the battery

is empty the product stops. Put the product in the

charging station to charge the battery. When the battery

is charged, the product moves out of the charging

station and stops. The product is now prepared to start

operation, but needs confirmation from you first.

Note:

If you want to cut the main area after the battery

is charged, set the product to

Main area

mode before

you put the product in the charging station.

4.3.3 Park

Operating mode

Park

means that the product returns

to the charging station where it remains until a different

operating mode is selected.

4.3.4 Park / Schedule

Operating mode

Park / Schedule

means that the product

goes back to the charging station where it stays until the

next schedule. If the product has operated the maximum

cutting time for the day, it will start to operate again the

next day. Refer to

Make an estimate of the necessary

operating time on page 22

4.3.5 Override schedule

Select

Override schedule

to temporarily override the

schedule settings. You can select to override the

schedule settings for 3 hours. The product cannot be

set to cut more than the maximum cutting time for each

day.

4.3.6 Spot cutting

The

Spot cutting

function is activated with the GO

button and is useful for quickly mowing an area where

the grass has been mown less than in other parts of

the yard. You must manually move the product to the

selected area.
Spot cutting means that the product mows in a spiral

pattern in order to cut the grass in the area where it was

started. When this is done, the product automatically

switches back to

Main area

Secondary area

4.4 To stop the product

Push the STOP button to make the product and

the cutting motor stop.

4.5 To set the product to OFF

Push the STOP button to open the hatch.

Push the ON/OFF button for 3 seconds.

Make sure that the LED indicator on the keypad is

off to make sure that the product is set to OFF.

4.6 To charge the battery

When the product is new or after long-term storage, the

battery can be empty. Charge the battery before you

start the product. In the

Main area

mode, the product

cuts and charges automatically.
1.

Push the ON/OFF for 3 seconds button to start the

product.

Put the product into the charging station until the

charging plates touch the contact plates.

Do a check that the display shows the message

CHARGING

to make sure that the product is

connected correctly to the charging station.

4.7 Adjust the cutting height

CAUTION:

During the first weeks after

a new installation, the cutting height must be

set to MAX to avoid damaging the loop wire.

After this, the cutting height can be lowered

step by step every week until the desired

cutting height has been reached.

The cutting height can be varied from MIN (2 cm / 0.8

in.) to MAX (5 cm / 2 in.).

4.7.1 To adjust the cutting height

Push the STOP button to stop the product.

Open the hatch.

1392 - 007 -

Operation - 29

Содержание EasiLife





















































Результаты поиска

Содержание EasiLife

Отзывы:

Похожие инструкции для EasiLife

Бренды по названию

Популярные бренды

Flymo EasiLife, Руководство оператора

Результаты поиска

Содержание EasiLife

Отзывы:

Похожие инструкции для EasiLife

Бренды по названию

Популярные бренды