Flymo 510747890, Руководство по эксплуатации

Страница: 7 / 232

do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed.
Use of the power tool for
operations different from those intended could result in a
hazardous situation.
Battery tool use and care
•
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Service
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
GRASS TRIMMER SAFETY WARNINGS
• Read the instructions carefully. Be familiar with the
controls and the correct use of the product.
• Never allow children or people unfamiliar with these
instructions to use the product. Local regulations can
restrict the age of the operator.
• Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
• Before use, always visually inspect the product for
damaged, missing or misplaced guards or shields.
• Never operate the product while people, especially
children, or pets are nearby.
• Wear eye protection and stout shoes at all times while
operating the product.
• Avoid using the product in bad weather conditions
especially when there is a risk of lightning.
• Use the product only in daylight or good artificial light.
• Never operate the product with damaged guards or
shields or without guards or shields in place.
• Switch on the motor only when the hands and feet are
away from the cutting means.
• Always remove the battery:
• whenever the product is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the product;
• after striking a foreign object;
• whenever the product starts vibrating abnormally.
• Take care against injury to feet and hands from the
cutting means.
• Always ensure that the ventilation openings are kept
clear of debris.
• Do not use heavier grass trimmer lines than
recommended in this manual.
• Do not use grass trimmer line materials of other types –
for example, metal wire, rope, and the like.
SAFETY INSTRUCTIONS FOR OPERATION
• Make sure the product is fully assembled before you
use it.
• The product can cause objects to eject, which can
cause damage to the eyes. Always use an approved eye
protection when you operate the product.
• Be careful, a child can come near the product without
your knowledge during operation.
• Do not operate the product if there are persons in the
work area. Stop the product if a person goes into the
work area.
• Make sure that you are always in control of the product.
• Do not use the product if you cannot receive aid if an
accident occurs. Always make sure others know when
you use the product before you start operation.
• Do not turn with the product before you make sure that
no persons or animals are in the safety area.
• Remove all unwanted materials from the work area
before you start. If the cutting attachment hits an object,
the object can eject and cause injury or damage.
Unwanted material can wind around the cutting
attachment and cause damage.
• Do not use the product in bad weather, such as fog,
rain, strong winds, risk of lightning or other conditions.
Dangerous conditions, such as slippery surfaces, can
occur because of bad weather.
• Make sure that you can move freely and work in a stable
position.
• Make sure that you cannot fall when you use the
product. Do not tilt when you operate the product.
• Always hold the product with your two hands. Hold the
product on the right side of your body.
• Operate the product with the cutting attachment below
your waist.
• Stop the motor before you move the product.
• Do not put down the product with the motor on.
• Before you remove the unwanted materials from
the product, stop the motor and wait until the cutting
attachment stops. Let the cutting attachment stop before
you or an aide remove the cut material.
7