Flyer Upstreet6, Оригинальное руководство пользователя

Страница: 211 / 271

45
EN
Brake discs and brake pads are partic -
uarly subject to wear . Have these safe -
ty-related components regularly checked
for wear and changed as required by
your FLYER specialist retailer .
Quelle: Shimano
®
techdocs
If the brake system needs to be cleaned, contact
your FLYER specialist retailer .
The component manufacturer's instructions on
how to clean the brake system are provided in the
respective brake system manual .
Only allow your FLYER specialist retailer to
maintain the brake system and change individu -
al brake system components . Only original spare
parts may be used . Otherwise it is possible that
the functionality of your FLYER e-bike may be im-
pacted or damaged .
Have the brake pads regularly checked accord -
ing to manufacturer specifications by your FLYER
specialist retailer .
18. Lighting system
Your FLYER e-bike's lighting system is usually
powered by the battery . When the battery is emp -
ty, the light should still work for about one hour .
The headlight must be aligned to illuminate the
road according to the legal regulations of your
country .
Have the lighting system checked and, if
necessary, replaced by your FLYER
specialist retailer if a fault occurs .
18.1 Lights
FLYER with pedal assist over 25 km/h with
high beam
Basic setting: when the system is activated, the
low beam/daytime running light is automatically
switched on . The light button has no function .
Switching between low beam/daytime running
light: Automatic switching based on the integrated
light sensor .
Clean your reflectors and lights on a reg-
ular basis. Warm water with cleaning fluid
or washing up liquid is suitable here .
The lighting system is a safety-related
component and it is vital that it is in prop -
er working condition . Check that it is
working correctly and safely at regular
intervals .
Only allow authorised FLYER specialist
retailers to perform checks and servicing
work after failures or temporary problems!
19. Mudguard
Some mudguard models are fitted with a safety
fastening in case an object jams between the
mudguard and the tyre .
This releases the mudguard from its holder to
prevent a fall .
You must stop riding immediately if a foreign body
is trapped between the tyre and the mudguard .
Remove the foreign object before beginning to
ride again . Otherwise, there is a risk of falls and
serious injuries .
You may under no circumstances ride
with a loose mudguard strut, as the strut
may jam in the wheel and block it . The
loose ends of the holders may lead to
serious accidents .
Damaged mudguards must be replaced by a
FLYER specialist retailer before you ride again .
You should also regularly check whether the brac -
es are fixed securely in the safety releases.
20. Accessories and
equipment
Installing accessories correctly and checking their
compatibility with the FLYER are the responsibili -
ty of the cyclist/buyer .
Only accessories listed in the FLYER catalogue
are approved for use with the FLYER by FLYER
AG. Check the accessories’ compatibility with your
FLYER model and the technical specifications (e.g.
maximum load, installation instructions, etc .) .
Always install accessories according
to the regulations and instructions .
• Only use add-on parts that comply
with the respective legal regulations
and road traffic regulations.