Flyer Upstreet6, Оригинальное руководство пользователя

Страница: 171 / 271

5
EN
Your FLYER has an automatic protection
against overheating . In the event of
overheating, this protection will switch
off the motor function until the motor has
reached a non-critical temperature. The
remaining functions are continued, e .g .
you can still drive with the lights on .
When the bike is not in use, the system
will automatically turn off together with
the light function after 10 minutes . This
duration can also be configured, as ex-
plained in section 5 .5 .9 . Therefore, al -
ways be sure to turn on the display be -
fore each ride .
5. FLYER with TDCM
drive and FIT
5.1 Operation with FLYER D1
display and FLYER RC1 and RC2
remote controls
Your FLYER with TDCM drive is operated via the
FLYER RC2 remote control and the FLYER D1
display .
FLYER RC2 remote control operating console
FLYER D1 display
1
2
3
1 . On/off button (press for at least 1 second to
switch on)
2 . USB port
3 . Display connector
Drive unit
The drive unit is an e-bike motor. The drive unit
is operated via the FLYER remote control (see
above) .
5.2 Operation
To activate the system, press the on/off button on
the display for at least one second . The “Drive”
menu will then be shown on the display .
The system can only be activated if a
sufficiently charged battery is used.
To turn off the electrical system, press the on/off
button for at least one second .
If the system does not detect any rider activity
for ten minutes, it turns off automatically to save
energy (this idle time can be configured as ex-
plained in section 5 .5 .9) .
The FLYER D1 display is operated using the
joystick on the FLYER remote control operating
console, so that your hands can remain on the
handlebars while you ride .
Move the joystick left or right to switch between
the individual main menus on the display .
The following main menus are available:
Drive: Main view with key information such
as speed, remaining range etc . The
system always starts up in this view .
Info: Information about the current journey
Fitness: Information about the rider’s athletic
performance
Data: Topographic data and ambient
temperature
Navi: Navigation with a smartphone