FLYCAM VISTA– I STABILIZATION SYSTEM 11
Repeat this action using the mid waist straps and buckles
attaching them to the central part of the chest plate.
The length of the chest plate can be adjusted according to the
height of the person by using this adjusting screw.
Properly set up and custom fit, your vest should look like the
provided picture
Straps are mode of trough nylon and Industrial Strength Velcro
and can be easily replaced or adjusted to suit individual needs.
Our DV vest can be used with all professionals arms incl.
Steadycam, Tiffin, Glide cam and Sachtler.
ASSEMBLING OF VISTA ARM
Insert the male part of the socket attached to the vista arm into
the female part of the socket attached to the vest.
Adjust the steel spring tension to maintain a preferred position
on the stabilizer factoring in the combined weight of your cam-
corder and stabilizer.
Your FLYCAM is ready to mount on the Vista Arm.
Once vertical and horizontal balance is achieved, mount the FLYC-
AM on the gimbaled control unit of the arm.
