background image

INSTALlATION INSTRUCTIONS

Step 1:  

Fold rope in half by aligning ends. Drape rope evenly over the branch. 

Tip : To install without a tall ladder, connect string or twine to a beanbag or 

a weighted sock. Make sure it’s long enough to make it over the branch and 

back to the ground, and throw the weighted object over the branch. Then, tie 

the string to the center of the rope loop, and pull it up over the branch.

Step 2:

Pull the ends of the rope through the loop so it wraps tightly around the branch. 

Repeat steps 1-2 with the other rope. Both ropes should be placed 24-36 inches 

apart when done.

Step 3 :

Lace the rope 

through the handles. 

Step 4:

Lace rope through holes on your Swurfer board. Tie a double overhand knot 

beneath the board, and level your Swurfer by adjusting the four knots. 

Trim rope and melt ends with lighter to prevent fraying.
Note: Rope must be taped prior to cutting,  

otherwise it will fray before you melt it.

STEP 5:

Visit www.swurfer.com

Show us where you hung your #Swurfer!

Swurfer.com

Distributed by The ROB Company, LLC

PO Box 13801 • Charleston, SC 29422

Checklist for Installation:

___ Blade 
___ Tape
___ Flame

RIGHT

WRONG

WRONG

24 - 36” APART

WRONG

RIGHT

WRONG

WRONG

RIGHT

WRONG

WRONG

WARNING: You should have the same amount of distance from the trunk of the tree or any other objects 

as you have from the ground to the branch. Swinging with the Swurfer® Kiçk involves inherent risk that 

can cause serious injury or even death. Purchaser and users assume all risk, responsibility and liability for 

use of the Swurfer® Kiçk, including any resulting loss or damage to persons or property. Flybar Inc. 

assumes no liability arising from the use or application of any of its products and specifically disclaims 

any and all consequential and incidental damages. Flybar Inc. makes no warranty representation or 

guarantee regarding the safety or suitability of its products for any given purpose. The purchaser or user 

assumes the responsibility for installation and assembly PLEASE CHECK THE ROPES, HANDLES AND 

BOARD BEFORE EACH USE AND REPLACE IF SHOWS SIGNS OF WEAR. Be aware of your surroundings, and 

Swurf within you limits. 

RIGHT

WRONG

RIGHT

WRONG

WRONG

24 - 36” APART

Отзывы: