Fluke VIBGUARD compact, Руководство пользователя, Страница: 17 / 50

4 Description
VIBGUARD compact is a stationary Condition Monitoring System (CMS) with the following features:
Modular design
Synchronous signal acquisition on all analog measuring channels
Network-ready
The CMS is used for vibration monitoring and early damage detection on all machines with rotating components.
The system records the following quantities:
Housing vibration
Bearing condition
Rotational speed
Process variables as current or voltage level or as digital input signals
Temperature, oil quality, alignment condition, load, etc.
The system is primarily comprised of the VIBGUARD compact system module with the power supply in the pro-
tective housing and the sensors with cables. An expansion by several CMS is possible. The connection to computer
or network is done via Ethernet (TCP/IP).
Network capable PC or notebook
The entire monitoring system is configured on the PC using software
(OMNITREND Center). Measurement tasks are created and transferred as
a measuring cycle to the VIBGUARD compact.
In contrast, the PC can receive the measurement data from VIBGUARD
compact, process it and display it graphically for evaluation. With regard to
sending the measurement data for evaluation, using the Internet via a
local Internet Service Provider is recommended.
VIBGUARD compact
The system's basic unit checks and controls measurements; processes and
saves measurement data, conducts preliminary diagnostics, supplies the
sensors and outputs alarm messages. It also features interfaces for exter-
nal measuring instruments.
Sensor
Converts vibration, pulse, spe¬ed, temperature etc into electrical values.
VIBGUARD compact 17
Installation and Operation