Fluke Versiv, Руководство пользователя

Страница: 98 / 260

Versiv Cabling Certification Product Family
Users Manual
84
Settings for FiberInspector Tests
Table 5 gives descriptions of the settings for FiberInspector tests.
To set up a project, which includes the settings in Table 5, cable
IDs, and operator names, see Chapter 11.
To set up a FiberInspector test
1
On the home screen, tap the test setup panel.
2
On the
CHANGE TEST
screen, select a FiberInspector test, then
tap
EDIT
.
Or to set up a new FiberInspector test, tap
NEW TEST
. If no
module is installed, the
MODULE
screen shows. Tap
FiberInspector
or
FI-7000
.
3
On the
TEST SETUP
screen, tap the panels to change settings
for the test. See Table 5.
4
On the
TEST SETUP
screen, tap
SAVE
when your test setup is
completed.
5
On the
CHANGE TEST
screen, make sure the button next to
the test is selected, then tap
USE SELECTED
.
Table 5. Settings for FiberInspector Tests
Setting Description
Module
Select a CertiFiber Pro or OptiFiber Pro module or
FI-7000.
Test Type
Select
FiberInspector
.
Test Limit
To give images a
PASS
or
FAIL
result manually, select
Manual
. Or, select a limit to compare scratches and
defects to specific criteria for size and location.
To see a different group of limits, tap
MORE
, then tap
the name of a group. To make a custom limit, tap
Custom
in the
Limit Groups
list. See the Technical
Reference Handbook.