Fluke Versiv, Руководство пользователя

Страница: 250 / 260

Versiv Cabling Certification Product Family
Users Manual
236
Use an Updated Main Tester to Update Other Testers
1
Turn on both testers and connect the AC adapters to both
testers.
2
Use the USB cable provided to connect the updated main unit
to the remote or to another main. See Figure 89.
3
Follow the instructions shown on the display of the updated
main unit.
Note
If a remote has newer software than the main
unit, the main unit can install the older software
in the remote so that you can use the two units
together. The remote cannot install the newer
software in the main unit.
Use LinkWare Live to Update the Software
1
Use an appropriate cable to connect the tester’s RJ45 Ethernet
port to a network port or connect a Wi-Fi adapter to the
tester’s type A USB port.
2
Go to the home screen, tap the
RESULTS
icon, then tap
TRANSFER
.
3
On the
TRANSFER RESULTS
screen, tap the
LinkWare Live
panel.
4
On the
SIGN IN
screen, enter the ID and password for your
LinkWare Live or Fluke Networks web account, then tap
SIGN
IN
.
5
If a Versiv software update is available, the tester shows a
message. Tap
YES
to install new software in your tester.
6
The tester reboots when the update is completed.
7
To install the update in a remote or another main tester, use
the USB cable provided to connect the updated main tester to
the other tester. See Figure 89.