Fluke Versiv, Руководство пользователя

Страница: 237 / 260

Chapter 12: Sync Projects with LinkWare
™
Live
Use LinkWare Live Through a Wi-Fi Ethernet Network
223
4
On the
SIGN IN
screen, enter the ID and password for your
LinkWare Live or Fluke Networks web account, then tap
SIGN
IN
.
5
If you use other people’s LinkWare Live accounts, the
ORGANIZATION
screen shows. Tap the organization you want
to use.
6
On the
SYNC PROJECTS
screen (Figure 87 on page 225), select
the projects you want to sync, then tap
SYNC
.
Use LinkWare Live Through a Wi-Fi Ethernet
Network
To connect the tester to a Wi-Fi network, you must have an
optional USB Wi-Fi adapter. Fluke Networks recommends these
adapters:
 ASUS USB N10 Nano
 TP-LINK TL-WN725N
 NETGEAR WNA1000M
Other adapters may be suitable. For the latest list of qualified
adapters, see this topic in the Fluke Networks Knowledge Base:
www.bit.ly/1ACJeFO
The tester can use wireless network channels 1 through 11.
1
Connect the Wi-Fi adapter to the tester’s type A USB port.
2
On the home screen, tap the
RESULTS
icon, then tap
TRANSFER
.
3
On the
TRANSFER RESULTS
screen, tap the
LinkWare Live
panel.
4
Select a wireless network if necessary.
If the network setting are not correct, the tester shows the
NETWORK
screen and a message about the necessary settings.
-continued-