Fluke Versiv, Руководство пользователя

Страница: 22 / 260

Versiv Cabling Certification Product Family
Users Manual
8

Caution
To prevent damage to the tester or cables under
test, to prevent data loss, and to make sure your
test results are as accurate as possible:

Do not connect the tester to an active network.
Doing so causes unreliable test results, can disrupt
network operations, and can cause damage to the
tester.

Connect to the adapters only plugs that are made
for Ethernet applications, such as RJ45, ARJ45, and
Cat 7 plugs. Other types of plugs, such as RJ11
(telephone) plugs, can cause permanent damage to
the jacks.

To make sure your test results are as accurate as
possible, do the reference procedure every 30 days.
See “About Link Interface Adapters” on page 30.

Do not operate portable transmitting devices, such
as walkie-talkies and cell phones, during a cable
test. Doing so can cause errors in test results.

For permanent link adapters, do not twist, pull on,
pinch, crush, or make kinks in the cables. See Figure
10 on page 31.
For CertiFiber Pro OLTS Modules

Warning: Class 1 and Class 2 Laser Products

To prevent possible eye damage caused by
hazardous radiation:

Do not look directly into optical connectors. Some
optical equipment emits invisible radiation that can
cause permanent damage to your eyes.

Keep the module’s OUTPUT ports covered with a
dust cap or keep a test reference cord attached. The
OUTPUT ports can emit radiation even when you do
not do a test.