Fluke Versiv, Руководство пользователя

Страница: 219 / 260

Chapter 10: Manage Test Results
How to Replace a Saved Result that Failed
205
If the settings do not agree, the tester shows a warning.
To add results for a different End setting for power meter and
FiberInspector tests

Do the test, then tap
SAVE
.
13
On the
SAVE RESULT
screen, select
End 1
or
End 2
, make sure
the
Cable ID
and
End
name are correct, then tap
SAVE
.
To add results from a different test
1
On the home screen, tap the test setup panel.
2
On the
CHANGE TEST
screen, tap the button next to a test,
then tap
USE SELECTED
.

If the ID set has a
Last ID
, the home screen shows the first
ID in the set that does not have results for the test you
selected.

If the ID set does not have a
Last ID
, tap the
Next ID
panel,
tap the
Next ID
box on the
CHANGE ID
screen, enter the
first ID for the set of saved results, then on the
CHANGE ID
screen, tap
DONE
.
3
Tap
TEST
or press

, then save the result.
How to Replace a Saved Result that Failed
To use the same test settings that were used for the saved result
1
On the home screen, tap the
RESULTS
icon.
2
On the
RESULTS
screen, tap a result that failed.
3
Tap
TEST AGAIN
.
4
When the test is completed, and if
Auto Save
is on, the tester
asks you if you want to overwrite the results. Tap
Yes
.
If
Auto Save
is off, tap
FIX LATER
(if the test failed) or
SAVE
(if
the test passed) to save the result.