Fluke Pan Tilt System, Руководство пользователя

Страница: 30 / 63

Pan Tilt System
Users Manual, Rev. 1.0, May 2020
30
4.3.2 Camera: Tele Lens 4x
Note the mounting position 2 for the camera on the
camera slider.
Use the provided spacer to ensure the correct camera
alignment.
Top view
Bottom view
A dedicated clamp assembly is required to provide
extra support due to the heaviness of the tele lens 4x.
Use the provided M4 screws for the mounting.
Fit the bottom half of the clamp by using a screw that
goes through the second hole on the camera slider
and the spacer to the clamp bush.
Ensure the spacer is fitted in its right orientation
– the
countersinks remain underneath. Please also note the
“FRONT” mark on the spacer.
2