OptiView T1/E1 and DS3/E3 WAN Analyzers
Updating the Software
49
Updating the Software
From time to time, improvements are made to the remote user
interface software and the analyzer’s firmware.
You can obtain the latest version of software by visiting our website at
and downloading the update file to
the PC that you use to control the analyzer. If you prefer to have
newer versions supplied to you on a CD, call your nearest Fluke
Networks distributor or service center to obtain the CD (see
“Contacting Fluke Networks”).
Note
To be notified when a new software update is available
for the analyzer, go to our website and register the
analyzer.
The update process has two main steps:
1.
Update the remote user interface software on the PC.
2.
Update the firmware on each OptiView WAN Analyzer to match
the software version on the PC.
Step 1: Update the Remote User Interface Software on the PC
To update the remote user interface software:
1.
Do one of the following:
•
Run the
Launch.exe
file on the supplied OptiView Resource CD.
OR
•
If the file was downloaded from the website, run the
downloaded executable file.
2.
Follow the
InstallShield
program instructions to update the
existing remote user interface software.
Содержание OptiView DS3/E3
Страница 60: ...OptiView Getting Started Guide 56...
