background image

 

LinkRunner Duo

 

TM

 Network MultiMeter 

Quick Reference Guide 

Welcome 

Thank you for purchasing Fluke Networks LinkRunner Duo!  This test tool enables you to quickly verify Ethernet 

copper/fiber cables, network connectivity and availability.  In addition, the instrument provides multiple tools for 

identifying the network device to which it is connected, identifies PoE ports, provides a Report generating function, 

and can serve as a reflector (optional feature) for Fluke Networks performance tests. You can use the included 

LinkRunner Connect PC application to quickly configure and update the instrument, download and view reports, and 

other useful functions. 

Safety 

To register your LinkRunner Duo or to obtain a keycode for a purchased option, go to 

www.flukenetworks.com/register

You can also register by sending e-mail to 

[email protected]

What’s in the box? 

Item 

1.  LinkRunner Duo 
2.  LinkRunner Connect CD 
3.  Quick Reference Guide 
4.  Wireview

TM

 Office Locator #1  

(not supplied with LRDUO-CE) 
5.  USB-A – USB-B Mini Cable 
6.  Registration Card 
7.  Batteries (4 AA) 

8.  RJ-45 Coupler  
(not supplied with LRDUO-CE) 

1

5

8

4

3

7

6

2

 

PN 3468966, April 2009 
© 2009 Fluke Corporation. All rights reserved.  Printed in USA 
All product names are trademarks of their respective companies

Содержание LinkRunner Duo

















Отзывы: