Course outline
Exercise 1: Traceability
•
Learn how MET/CAL procedures ensure the
traceability required by quality standards
Exercise 2: FSC and the ASK flags
•
Explains how an FSC works
•
Shows procedure control using the basic ASK
flags
Exercise 3: UUT tolerance
•
How to assign a Unit Under Test (UUT) tolerance
specification to a procedure line
•
Explains the use of the TOL FSC
Exercise 4: Using the MOD 4 field
•
How to use MOD 4 to do setup tests
•
How to use MOD 4 to do nominal and compari-
son tests
Exercise 5: Using the DISP FSC
•
How to use the DISP FSC to give instruction to
the operator
•
Using the ASK -P flag to control the repeat and
cancel buttons
•
How to use the DISP FSC to write to the results
file
Exercise 6: Using the memory registers
•
Explains how the memory registers work
•
How to use the MEMI FSC
Exercise 7: The EVAL, JMPL, and Label FSCs
•
How to use the operator evaluation FSC
•
How to create a label and a jump to label
statement
Exercise 8: The OPBR and JMP(x) FSCs
•
How to do internal branching on a procedure
•
How the jump FSC works
Exercise 9: Using key MATH functions
•
How to use some of the MATH functions to get
your results
Exercise 10: IF, ELSE, ELSEIF, ENDIF FSCs
•
How to do conditional branching using IF, ELSE,
ELSEIF, and ENDIF
Exercise 11: The WAIT, DO, UNTIL, WHILE,
ENDW FSCs
•
How to use the WAIT FSC to provide a delay
•
Show examples of the DO, UNTIL, WHILE and
ENDW FSCs
Exercise 12: The MESS FSC
•
How to use the MESS FSC to store later
messages
Exercise 13: The MEMC, MEMCX and IEEE FSCs
•
How the MEMC and MEMCX FSCs perform
evaluations based on a comparison between
the UUT Indicated value and the System Actual
value
•
Provides a basic understanding of how the IEEE
FSC works
Exercise 14: The STD and ACC FSCs
•
Using the STD FSC to provide traceability to a
user defined standard
•
Using the ACC FSC to assign an accuracy to a
user defined standard
Exercise 15: The PIC and PICE FSCs
•
How to provide pictures in a procedure
Exercise 16: The RSLT FSC
•
How to write directly to the results
System requirements
•
Personal computer with 1+ GHz processor,
128 MB RAM, 50 MB hard disk space available
•
VGA display with minimum of 600 X 800 reso-
lution set to at least 256 colors and small fonts
•
CD-ROM drive
2 Fluke Corporation MET/CAL
®
Plus
Version 7
Fluke Calibration
PO Box 9090,
Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (877) 355-3225 or Fax (425) 446-5116
In Europe/M-East/31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or Fax (905) 890-6866
From other cou1 (425) 446-5500 or Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2007-2011 Fluke Corporation. MET/CAL is a registered trademarks of Fluke Corporation.
Specifications subject to change without notice. Printed in U.S.A. 1/2011 2819674B D-EN-N
Modification of this document is not permitted without written permission from Fluke Corporation.
Fluke Calibration.
Precision, performance, confidence.
™
Ordering Information
MET/CAL-CBT/PW
MET/CAL Procedure Writing Computer-Based
Training
, item number 2790473
For a price quote or to order, call the Fluke Calibration
Customer Care Center at 877-355-3225 (option 2) or email
