Fluke CableIQ, Руководство пользователя, Страница: 42 / 92

CableIQ Qualification Tester
Users Manual
32
Autotest on Coaxial Cabling (75
Ω
)
1 Turn on the tester and turn the rotary switch to
AUTOTEST .
2 Press K c . If the coax test is disabled, press
H
or J Setup to enable it.
3 Connect the tester and wiremap adapter or ID
locator to the cabling as shown in Figure 13.
4 Press
P
. The Autotest proceeds when a wiremap
adapter or ID locator is detected. The analog toner
turns on if neither is detected.
5 To view results, press J M . See Figure 14.
6 To save the results:
a. Press
K S
.
b. Use
AD
and H to select the Site , Location ,
or Outlet field for editing. You can enter up to
17 characters in each field. See Figure 4 on page
13 for details on editing text.
To see a list of predefined labels for the
highlighted field, press
J
List . Use
AD
,
B C , or SHIFT +
AD
to move through the
list. Use
H
or
J
to select an entry.
c. On the Enter ID screen, press K S to save
the results with the Site , Location , and Outlet
entries shown.
Note
The last character of the Outlet string
increments each time you save an Autotest.