DSX-602 CableAnalyzer
Users Manual
84
How to See the Tester’s MAC Address
Some networks require users to register their device’s MAC
address before they can connect to the network.
There are two MAC addresses: one for the wired port and one for
the Wi-Fi adapter.
To see the tester’s or Wi-Fi adapter’s MAC address
1
On the home screen tap
TOOLS
, then tap
Network
.
2
On the
NETWORK
screen, tap the
Wired
or
Wi-Fi panel
. The
MAC addresses shows at the top of the
WIRED
and
WI-FI PORT
screens.
Use LinkWare Live Through a Wired Ethernet
Network
1
Use an appropriate cable to connect the tester’s RJ45 Ethernet
port to an active network port. If the cable is good and the
port is active, the LEDs on the tester’s port will come on.
2
On the home screen, make sure the
Operator
name is correct.
The tester uses the email address associated with the operator
name as the ID when you sign in to LinkWare Live.
If no address is associated with the name, or if you enter a
different address on the
LWL SIGN IN
screen, the tester
associates the name with the address you enter.
3
On the home screen, tap the
SYNC
icon.
4
When the tester connects to the network, the wired network
connection icon shows at the top of the screen:
5
On the
LWL SIGN IN
screen, if necessary, enter the ID and
password for your LinkWare Live account, then tap
SIGN IN
.
6
If you use other people’s LinkWare Live accounts, the
ORGANIZATION
screen shows. Tap the organization you want
to use.
Содержание CableAnalyzer DSX-602
Страница 60: ...DSX 602 CableAnalyzer Users Manual 52 ...
Страница 74: ...DSX 602 CableAnalyzer Users Manual 66 ...
Страница 100: ...DSX 602 CableAnalyzer Users Manual 92 ...
