manualshive.com logo in svg

Fluke CableAnalyzer DSX-602, Руководство пользователя

Поделиться
Скачать
Fluke CableAnalyzer DSX-602 Скачать руководство пользователя страница 83

75

Chapter 5: Use Projects

Why Use Projects?

The tester’s ProjX

™

 management system lets you set up projects 

that help you monitor the status of a job and make sure that your 
work agrees with the requirements of the job.

You can use a project to do these tasks: 

Specify the tests that are necessary for a job. 

Specify settings for tests.

Specify an operator for the job.

Make sets of sequential IDs to use as names for test results. 

Automatically save test results with IDs from a set.

Add the results from other necessary tests to each saved result 
in the project. 

See which IDs do not have results for a specified test.

See what percentage of a job is completed. 

See how many links passed and how many failed.

Keep the test results from a job in one place for easy access. 

When you use a project, you can do tests and use IDs that are not 
specified in the project if necessary. You can also easily change 
the settings in a project if necessary.

Note

To manage projects in the cloud, use the 
LinkWare Live web application. See Chapter 6.

Содержание CableAnalyzer DSX-602















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды