Fluke CableAnalyzer DSX-5000 Скачать руководство пользователя страница 340

Страница: 340 / 700

Versiv Series Cabling Certification Product Family

Technical Reference Handbook

304



SmartLoop

™

test: One test gives you OTDR results for both

fibers in a link.



DataCenter OTDR

™

test gives optimal performance when you

do tests on fiber installations that have short links, many
connections, and possibly large reflections.



FaultMap

™

test lets you make maps of your cable plant, see

patch cords as short as 0.5 m, and see events that have poor
reflectance.



Visual fault locator helps you verify the continuity of fibers
and locate faults in fibers and connectors.



Optional video probe lets you inspect fiber endfaces and save
the images in test reports.

OptiFiber Pro Connectors, Keys, and LEDs

Refer to Figure 128.



LCD display with touchscreen.



Singlemode OTDR port with interchangeable SC adapter and
protective cap. The LED in front of the port turns on when the
port emits an optical signal.

Warning

Do not look directly into optical connectors. Some
sources emit invisible radiation that can cause
permanent damage your eyes.

Caution

Do not connect APC (angled physical contact)

connectors to the OTDR ports. An APC connector
can damage the UPC fiber endface in the ports.



Multimode OTDR port with interchangeable SC adapter and
protective cap. The LED in front of the port turns on when the
port emits an optical signal.

Содержание CableAnalyzer DSX-5000





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CableAnalyzer DSX-5000

Отзывы:

Fluke CableAnalyzer DSX-5000, Техническое справочное руководство, Страница: 340 / 700

Результаты поиска

Содержание CableAnalyzer DSX-5000

Отзывы: