Fluke 990DSL, Руководство пользователя

Страница: 72 / 242

990DSL
Users Guide
4-8
The POTS Toolbox
The POTS Toolbox includes the same tests that are available in the Auto-Test
(see Table 4-1) as well as other fault location tests. This section introduces the
POTS toolbox tests, shows you how to run them, and describes their results.
Running a Test in the POTS Toolbox
•
From the
Main
menu, press
A
(
POTS
) to display the POTS toolbox
(Figure 4-3). Press an arrow key to select the desired test, then press
K
.
OR
•
Display the setup menu for the desired test (see “Displaying a Setup
Menu” in Chapter 3), then press
K
.
To stop a running test, press
K
.
acy14s.eps
Figure 4-3. POTS Toolbox