Fluke 990DSL, Руководство пользователя

Страница: 118 / 242

990DSL
Users Guide
4-54
Running a Dial-Up Test
This section describes each Dial-up Test and shows you how to run it. Unless
otherwise indicated, follow this procedure to run a test in this group:
1. Select
Dial-up Tests
in the POTS Toolbox, then press
L
.
2. Select the desired Dial-Up test from the Dial-Up Toolbox, and press
L
.
The
Select Dialing Mode
screen is displayed.
3. Do one of the following:
•
Press
A
(
Auto-Dial
). Select the desired phone number from the
displayed
Phone Numbers
list and then press
K
to start auto-dialing.
OR
•
Press
B
(
Manual Dial
). Manually dial the telephone number on the
tester’s keypad and then press
L
.
After the number is dialed, the selected test is performed.
acy40s.eps
Figure 4-30. Dial-Up Test Toolbox