High-Pressure Modular Controller
Rear-Panel Features
25
Table 8. Rear-Panel Features (cont.)
Item
Description
IEEE-488
Connector
IEEE-488.2 remote operation interface. Refer to the
Remote Programmers Guide
on
the Fluke Calibration website for more information on remote operation.
RS-232
Connector
RS-232 remote operation interface. Refer to the
Remote Programmers Guide
on the
Fluke Calibration website for more information on remote operation.
AC PWR
INPUT
Connector
A grounded male three-prong connector that accepts the mains power cord.
Master
ON/OFF
Switch
Supplies and disconnects mains power to the unit. This switch must be in the ON (I)
position before the Standby button on the front panel will function.
F1 Fuse
Holder
Line power fuse. See
Fuse Replacement
for fuse rating information and the fuse
replacement procedure.
Chassis
Ground
A threaded connection that is internally grounded to the chassis. If the Product is the
location of the ground reference point in a system, this binding post can be used for
connecting other instruments to earth ground. (The chassis is normally connected to
earth ground through the three-conductor line cord instead of through the earth
ground binding post.)
Removable
Manifold/
Pressure
Connection
All of the pressure connections are made on the rear panel through a replaceable
manifold. For the 8270A, the manifold comes in three localized versions: NPT, BSP,
and SAE. The 8370A is available with only one manifold type. See
Rear-Panel
Manifold Pressure Connections
for more information. See Specifications for pressure
limitations for each port.
