Fluke 729 Pro, Руководство пользователя

Страница: 7 / 58

1
Introduction
The Fluke 729 Pro Automatic Pressure Calibrators (the Product) are portable field
pressure calibration tools for lab or field use. This battery-operated product performs
automatic pressure calibration of transmitters, pressure switches, and gauges. The
automatic functions are done by the Product or by downloaded tasks from calibration-
management software (CMS). The Product also supplies basic HART
®
communicator
functions when used with HART-capable transmitters.
Product key features and benefits include:
• Automatic pressure calibration of transmitters, pressure switches, and pressure
gauges.
• Source and measure pressure to test and calibrate pressure sensors, transmitters,
and other pressure instruments.
• Source and simulate milliamp signals while measuring pressure for testing current to
pressure converters (I/P)
.
• HART (Highway Addressable Remote Transducer) communication to configure and
perform trim on HART smart-pressure transmitters.
• Provides Loop Power and simultaneously measures mA output from a connected
device.
• Measures pressure with all Fluke-750P Series pressure modules.
• Document automated as-found/as-left procedures to satisfy quality regulations or
audits with DPCTrack2 software.
• Advanced features like auto step and auto ramp allow tests of devices automatically.
• The pressure switch test automatically ramps pressure up and down across expected
switch trip setting to calibrate pressure switches.
• Interchangeable Pressure Measurement Modules