background image

 

Pressure Calibrator 

 

How to Contact Fluke   

 

 

 

27 

LIMITED WARRANTY & LIMITATION OF LIABILITY 

This Fluke product will be free from defects in material and workmanship 
for three years (one year for pump assembly) from the date of purchase. 
This warranty does not cover fuses, disposable batteries or damage from 
accident, neglect, misuse or abnormal conditions of operation or handling. 
Resellers are not authorized to extend any other warranty on Fluke’s 
behalf. To obtain service during the warranty period, send your defective 
Calibrator to the nearest Fluke Authorized Service Center with a 
description of the problem. 

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER 
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, 
ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY 
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES 
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some 
states or countries do not allow the exclusion or limitation of an implied 
warranty or of incidental or consequential damages, this limitation of 
liability may not apply to you. 

How to Contact Fluke 

To order accessories, receive operating assistance, or get 
the location of the nearest Fluke distributor or Service 
Center, call: 

USA:  1-888-99-FLUKE (1-888-993-5853) 
Canada:  1-800-36-FLUKE (1-800-363-5853) 
Europe:  +31 402-675-200 
Japan:  +81-3-3434-0181 
Singapore:  +65-738-5655 
Anywhere in the world:  +1-425-446-5500 

Or, visit Fluke's Web site at 

www.fluke.com

Address correspondence to: 

Fluke Corporation 

Fluke Europe B.V. 

P.O. Box 9090, 

P.O. Box 1186, 

Everett, WA 98206-9090   

5602 BD Eindhoven 

U.S.A. The 

Netherlands 

 

Содержание 718 Series





































Отзывы: